- Model: DLN-24-5
- Wire Qty: 8/10/12/16/20/24 (14,18,22 optional)
- Ring space: No restriction
- Cage outer diameter: 100-200mm
|
|
|
|
|
|
- Input voltage: 380V(2-phase) or specified by customer
- Power frequency: 50/60Hz
- Power capacity: 80KVA
- Instant power in sync mode: 36KVA
- Instant power in async(time-sharing) mode: 18KVA
- Transformers: 2sets
- Air pressure: 0.6-0.8MPa
- Air flow: 300L/min
- Cooling method: natural cooling
- Weight: about 1200KG
Features
- Touch screen control, 54 groups of ring spacing setting
- Bad weld detection and auto re-welding
- Material selection function, short ring spacing auto compensation
- Ring space is programmable and bag cage is pulled by step motor; ring space precision is 0.1mm; pulling speed is 0.4m/s
- Rails (standard 7500mm, up to 9000mm) and material shelf equipped and connected to the welding unit. The front end of the rail is adjustment-free. Good linearity can be achieved for wire cages
- Equipped with auto feeding unit, no restrictions on ring space
- Four air tanks, short air route inside the machine ensures quick response of the cylinder
- 25mm thick front plate resulted from one-time machining, firmly secure that the welding cylinders are on the same plane and perpendicular to the axes, thus the linearity of the cage can be ensured
- Stroke-adjustable cylinders increase welding speed, pre-pressing only takes 0.08s
- Controlled by micro-computing unit
- Time-sharing power-on transformer reduces the burden on local electricity grid
|
|
